fpga Archive

Shoot-through detector using FPGA

This project allows to detect a shoot-through condition on digital drivers. The FPGA board used is Mimas A7 Mini from Numato Lab, the code is written in Verilog and IDE is Vivado. What is shoot-through? In a half-bridge stage (Fig 2), if both transistors are driven simultaneously, even for a few nanoseconds, a shoot-through condition

4Bit Division Verilog Example on Zynq FPGA

This small sketch demonstrates the four bit division operation on Zybo FPGA board. Zybo is a small and cheap board from Digilent, equipped with powerful Xilinx’s Zynq chip. This sketch was implemented to use only the PL, but neither PS nor ARM. The usage is simple: on switches 3:0 select the upper four bits of

New toy – ZYBO

The parcel arrived yesterday with the new toy. Together with The Zynq Book is a great start to learning embedded, and that from several points of view: digital design, FPGA, VHDL, Verilog, accelerators, multimedia processing embedded software for a ARM Cortex-A9 dual core platform Linux with all of it, from the boot process to the